![Carved Wood Pattern Material](https://d3stdg5so273ei.cloudfront.net/ebisset/2021-03-21/111619/450xAUTO/cover_03_s-ebisset-crop.jpg)
Carved Wood Pattern Material
![Emily Bisset](https://d3stdg5so273ei.cloudfront.net/ebisset/2020-04-21/879037/50x50/12654436_10206765368711249_7092498429300183019_n-ebisset-crop.jpg)
This is a carved wood material made 100% in Substance Designer, rendered in Marmoset Toolbag 3. I also made a trim/decal sheet from the patterns I had made for it.
![](https://d3stdg5so273ei.cloudfront.net/ebisset/2021-03-21/944958/1400xAUTO/Full_07_s-ebisset.jpg)
![](https://d3stdg5so273ei.cloudfront.net/ebisset/2021-03-21/944958/1400xAUTO/Full_03_ss-ebisset.jpg)
![](https://d3stdg5so273ei.cloudfront.net/ebisset/2021-03-21/944958/1400xAUTO/Full_04-ebisset.1_ss.jpg)
![](https://d3stdg5so273ei.cloudfront.net/ebisset/2021-03-21/944958/1400xAUTO/Full_06_cropped2_s-ebisset.jpg)
![](https://d3stdg5so273ei.cloudfront.net/ebisset/2021-03-21/944958/1400xAUTO/Full_05_s-ebisset.jpg)
This is a carved wood material made 100% in Substance Designer during my free time. I also made a simple trim/decal sheet from the patterns I had created as I think my next personal project will be using this to texture a prop!
![](https://d3stdg5so273ei.cloudfront.net/ebisset/2021-03-21/377218/1400xAUTO/Trim_03_s-ebisset.jpg)
![](https://d3stdg5so273ei.cloudfront.net/ebisset/2021-03-21/377218/1400xAUTO/Trim_02_s-ebisset.jpg)
![](https://d3stdg5so273ei.cloudfront.net/ebisset/2021-03-21/638602/1400xAUTO/Trim_04_s-ebisset.jpg)
I'm still relatively new to making trim sheets but hopefully using them on a model will help me to understand what a good trim sheet should look like. Also had a look at making my .sbsar files better when it comes to exposed parameters, something I will be looking into further later on too.
![](https://d3stdg5so273ei.cloudfront.net/ebisset/2021-03-21/177699/1400xAUTO/graph_SD_Final-ebisset.png)
I tried to keep my graph relatively neat but with the added trim sheet outputs it started to get a bit noodle-icious at the end!
Comments (2)